The FET-type solution was first used for its application in the legendary UREI 1176 compressor from the 70s. The most important feature inspired by revision A is the input transformer used and pure class A output stage. The compressor is equipped with a relay bypass, 2:1 Ratio and Slam Mode accessib..
The ALTER 500 is a FET compressor built in the 500 standard. The FET-type solution was used for the first its application in the legendary UREI 1176 compressor from the 70s. The ALTER is a single-channel unit with stepped input and output controls. The Ratio switch has six positions, including two a..
The IGS Bison 500 is a simple mid/side processor with a dry/wet mixer. It can be plugged into any 500 series rack equipped with a standard power supply. It has two stereo jack connectors (2 sends and 2 returns) on the front panel of the device used for plugging in your favorite dual mono or two mono..
The DTL is a tube microphone preamp adapted to work with any type of microphone. A wide range of amplification makes it possible to record drums as well as the quietest ribbon microphone. DTL does a great job of recording tracks from external devices such as synthesizers or drums machines (like Akai..
ConceptThe Multicore is very versatile tool in your studio. Three bands of classic analog VCA compression provide an infinite field of possibilities to shape the sound. The device can be used as a mix bus compressor or for mastering purposes. Due to separate control of the audio bands it can be appl..
IGS Audio NEON 500 is a microphone preamplifier and compressor combo fitted into a single 500-series module, that can work with any API 500 Series compatible rack. It was created using advanced transformerless design, providing low noise signal path, excellent dynamic response, and maintenance free ..
The IGS ONE LA is an input and output transformer balanced, full tube device. The input of the system includes a Sowter 4383 transformer, the output an Edcor 15k/600. Two 6N1P-EW dual-triodes are installed on the audio circuit, while the compression circuit is equipped with the 6N2P-EW triode and th..
The IGS ONE LA 500 is an opto-compressor built for the 500 series format. This is the first high voltage vacuum tube 500 series module that is offered by IGS. It is powered with 250V DC from an on-board voltage converter, so it can be plugged into any 500 series rack equipped with a standard power s..
The IGS Panzer 500 is a 10-slot enclosure for 500-series modules. It will allow you to configure your favourite set of tools for studio or field recording, as well as small home recording setup. It doesn't matter if you're going to fill it up with your favourite microphone preamps, EQs or compressor..
The PHOTON 500 is an optical compressor, based on technology from the 60's, first used in the early LA-2A limiters and later in the LA4. As an homage to these legendary products, we packed this technology in a 500-series module. The PHOTON 500 uses an opto-coupler, which introduces negative feedback..
Rubber Bands 500 is a passive equalizer absurdly reduced in size. This tiny module is equipped with transformer balancing on input and output (Carnhill) as well as a discrete driver circuit. Of course the entire filtering section is passive and mirrors analogue equalizers from the 60s. There is sepa..
RB500ME is a stereo passive equalizer packed into a double 500-series module. This beast is equipped with transformer balanced inputs (Carnhill) and outputs (Edcor) as well as a class-A driver circuit. Of course the entire filtering section is passive and it mirrors analogue equalizers from the 60s...